CSG85GL Cable Cutter
Greenlee Textron / Subsidiary of Textron Inc.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron shall not be liable for damages
resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Textron.
AVIA is a registered trademark of Avia International.
Mobil is a registered trademark of Mobil Oil Corporation.
NUTO is a registered trademark of Exxon Corporation.
Tellus is a registered trademark of Shell Oil Company.
KEEP THIS MANUAL
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ...................................... 3–5
Identification ................................................................... 6
Specifications ................................................................. 6
Operation ....................................................................... 7
Maintenance ................................................................... 8
Troubleshooting ............................................................. 9
Disassembly ................................................................. 10
Assembly ...................................................................... 11
Illustrations ............................................................. 12–14
Parts List ................................................................ 15–17
Description
The CSG85GL Cable Cutter is a hand-held tool intended
to cut copper and aluminum cable up to 85 mm (3-1/4")
in diameter. This tool is intended to cut most low and
medium voltage copper and aluminum cable found on
most job sites.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
CSG85GL11 120 Volt Cable Cutter
CSG85GL22 230 Volt Cable Cutter
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
