Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Battery-powered Pistol Grip Cable Cutters
Model X-FCC ID: 2AGL2LX; IC ID: 20646LX
This device complies with Part 15 of the FCC Rules and
with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation
Note: Change or modifications made to this equipment
not expressly approved by Greenlee may void the FCC
authorization to operate this equipment.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Note: For body worn operation, this device has been
tested and meets the FCC RF exposure guidelines for
an uncontrolled environment. The maximum reported
SAR value is 0.08 mW/g
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
• ESG50LX Battery-powered Cable Cutters
• ESG55LX Battery-powered Cable Cutters
• ESC85LX Battery-powered Cable Cutters
• ESC105LX Battery-powered
Cable Cutters
• ESG105LX Battery-powered
Cable Cutters
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge at www.greenlee.com.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
KEEP THIS MANUAL
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3–4
Identification ................................................................... 5
Specifications ................................................................. 6
Operation .................................................................... 7–8
LCD Screen .................................................................... 9
Maintenance ................................................................. 10
Troubleshooting ............................................................ 11
Description
Greenlee’s Battery-powered Pistol Grip Cable Cutters
are hand-held tools intended to cut the following:
•
ESG50LX:
Copper and aluminum cable up to 2"
(50 mm) in diameter. This tool is intended to cut most
low- and medium-voltage copper and aluminum cable
found on most job sites.
•
ESG55LX:
ACSR and guy strand.
•
ESC85LX:
Copper and aluminum cable up to 3.3"
(85 mm) in diameter. This tool is intended to cut
most low- and medium-voltage stranded copper and
aluminum cable.
•
ESC105LX and ESG105LX:
Copper and aluminum
cable up to 4.13" (105 mm) in diameter. This tool
is intended to cut most low- and medium-voltage
stranded copper and aluminum cable as well as lead
or soft steel armored cable found on job sites.
These tools have a retraction stop feature, which allows
the operator to stop the retraction motion of the ram to
shorten cycle time.
These tools have a Bluetooth
®
connectivity and an LCD
screen.
These tools are protected by U.S. Patent No. 6,206,663,
6,276,186, 6,401,515, and 6,718,870.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Textron Innovations Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
