Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
8
Battery-powered Pistol Grip Cable Cutters
Operation
(cont’d)
Cutting Cable —ESG50LX
1. Open the head by lifting the locking flange.
2. Position the cable in the open cutting head.
3. Close the cutting head.
4. Pull the trigger. The blades will begin to close.
5. When the cut is completed, the ram will retract
completely.
6. To stop the ram from returning fully, activate the
trigger for a brief moment. This activation will close
the retraction valve and stop the retraction motion.
Note: At any time during cutting, pushing the retract
button will result in a complete return of the ram.
Cutting Cable —ESG55LX and ESG105LX
1. Open the head by using the pull pin.
2. Position the cable in the open cutting head.
3. Close the cutting head and insert pull pin.
4. Pull the trigger. The blades will begin to close.
5. When the cut is completed, the ram will retract
completely.
6. To stop the ram from returning fully, activate the
trigger for a brief moment. This activation will close
the retraction valve and stop the retraction motion.
Note: At any time during cutting, pushing the retract
button will result in a complete return of the ram.
Cutting Cable —ESC85LX and ESC105LX
1. Position the cable in the open cutting head.
2. Pull the trigger. The blades will begin to close.
3. When the cut is completed, the ram will retract
completely.
4. To stop the ram from returning fully, activate the
trigger for a brief moment. This activation will close
the retraction valve and stop the retraction motion.
Note: At any time during cutting, pushing the retract
button will result in a complete return of the ram.
Pull
trigger
to cut
Push to
retract blades
Pull trigger
to cut
Push to
retract blades
Pull trigger
to cut
Push to
retract blades
