Greenlee Textron / Subsidiary of Textron Inc.
3
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
ESG45GL Battery-powered Cable Cutter
IMPORTANT SAFETY INFORMATION
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning will
result in severe injury or death.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for prevent-
ing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
SAFETY
ALERT
SYMBOL
Do not use solvents or flammable
cleaners to clean cutter body.
Solvents could ignite causing
serious injury or property damage.
High pressure hazard:
Do not use fingers or hands to
check for oil leaks. High pressure
oil easily punctures skin causing
serious injury, gangrene or death.
If injured seek medical help immedi-
ately to remove oil.
• Electrical shock hazard: The owner of this cutter
must be certain that all users of this tool are
trained in the applicable safety codes and stan-
dards, as well as, in the safe use of this tool and
its accessories.
• Do not cut cable under tension.
• Use the tool for its intended purpose which is
cutting cable.
Failure to observe this warning will result in severe
injury or death.
Electrical shock hazard: This tool
is not insulated. Use protective
equipment when utilizing this unit
near energized electrical lines.
Failure to observe this warning will
result in severe injury or death.
