Greenlee Textron / Subsidiary of Textron Inc.
6
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
ESG45GL Battery-powered Cable Cutter
Pull trigger to cut
Push to
retract blades
Charging the Battery
Read the instructions supplied with the charger for
explanation of proper use.
Testing the Battery
A flickering battery load display indicates a low charge
level. A constant light when the tool is in neutral also
indicates a low charge.
Note: It is normal for the battery load display to light at
both the beginning of a cutting cycle and at the point of
maximum pressure.
Cutting Cable
1.
Open the head by using the pull pin.
2.
Position the cable in the open cutting head.
3.
Close the cutting head and insert pull pin.
4.
Pull the trigger. The blades will begin to close.
5.
When the cut is completed, the ram will retract
completely.
Note: At any time during cutting, pushing the return
button will result in a complete return of the ram.
Operation
