IPM-100
7
Display Icons
11. LO
Low Span Output is selected (0% or 4 mA)
12. HI
High Span Output is selected (100% or 20 mA)
13. BAT
Low battery
14. PWR XMTR
Power Transmitter Function is selected
15. 2-WIRE
2-Wire Function is selected
16. -8.8.8.8
Measurement
Over-range (the signal is too high for the range)
Under-range (the signal is too low for the range)
Flashing digits Open loop or reversed polarity
17. %
Percent
18. mA
Milliamperes
19. READ
Read Function
is selected
20. SOURCE
Source Function
is selected
11
16
12
13
14
15
17
18
19
20
Features
Operating Functions
Output Checkpoints
Switch or Button
Use to:
SOURCE
READ
• Select SOURCE/POWER TRANSMITTER.
POWER
2-WIRE
• Select READ/2-WIRE SIMULATOR.
MODE
• Toggle between SOURCE and POWER TRANSMITTER.
• Toggle between READ and 2-WIRE SIMULATOR.
mA / %
Select a display mode, either current (mA) or percent (%).
Switch or Button
Use to:
100% / 20 mA
Set the output to 100%, or 20 mA.
SET
Set the output to the user-defined set point.
The default setting is 12 mA. To change this, see Settings.
0% / 4 mA
Set the output to 0%, or 4 mA.
