16
Accuracy
(cont’d)
Capacitance
Range
Accuracy
100.0 nF
±
(3.5% + 0.6 nF)
1000 nF
±
(3.5% + 6 nF)
10.00
µ
F
±
(3.5% + 0.06
µ
F)
100.0
µ
F
±
(3.5% + 0.6
µ
F)
Accuracy below 50 nF is not specified.
Accuracies with film capacitor or better
Specified with battery voltages above 2.8 V
Frequency
Range
Accuracy
Specified at
10.00 Hz to
±
(0.5% + 4d)
less than 20 V
30.00 kHz
sine RMS
The small letter d, under accuracy, in the table above refers to
the least significant digit.
The sensitivity is approximately 3 V RMS for compatibility with
logic level signals. The frequency of voltage sources up to
450 VAC can be measured, but noise may cause inaccurate
readings.
Continuity
The threshold is between 50
Ω
and 300
Ω
.
Summary of Contents for PDMM-20
Page 12: ...12 Typical Measurements Voltage Measurement Continuity Check Resistance Measurement ...
Page 40: ...40 ...
Page 60: ...60 ...
Page 61: ...61 PDMM 20 ...
