Model NO. 17W/T8/4B/35K/DE
LIMITED WARRANTY:
This product is warranted to be free from defects in workmanship and material for 5 years. If it fails to do so,
Greenlite™ will send you, at its election, a replacement product or refund your original purchase price upon
receipt of the returned fixture, register receipt and proof of purchase. Please call
(844) 695-9090
to find out
how to return the product. Do not return this product to the retailer. This limited warranty does not cover product
subject to accident, neglect, abuse, misuse or acts of God. Replacement or refund is your sole remedy.
For all enquiries, please contact our customer service team at
info
@
greenliteusa.com
or
1-844-695-9090
from 9:00 AM to 5:00 PM EST.
www.greenliteusa.com
V1-11/01/2021
1) Read all WARNINGS before continuing this section.
2) Make sure POWER IS TURNED OFF at the source to the location at which you are installing the product.
3) Remove lens, cover and fluorescent tubes. Cut away all wires connecting the ballast. (fig. 1)
4) Make sure to connect the line (L) and neutral (N) to the corresponding ends of the tube marked L and N.
Note this product is double-ended, do not wire to a single end. (fig. 2)
5) Follow wiring diagrams for number of lamps and original ballast type (instant start, programmed start or rapid start).
(fig. 3-6)
6) Visibly affix the “Modification Sticker” to the fixture and reinstall housing cover and lens if applicable.
7) Return power back to the source and installation is complete.
Cut all wires connecting ballast
N
L
fig. 1
fig. 2
Connect L and N to corresponding ends marked L and N
Ballast
fig. 3
fig. 4
Instant Start (Shunted Socket) Configuration
2-lamps
Programmed Start or Rapid Start (Non-shunted socket) Configuration
2-lamps
N
L
N
L
N
L
N
L
fig. 5
fig. 6
Instant Start (Shunted Socket) Configuration
4-lamps
Programmed Start or Rapid Start (Non-shunted socket) Configuration
4-lamps
N
L
N
L
N
L
N
L
N
L
N
L
N
L
N
L
LED TUBE INSTALLATION GUIDE
17W LED T8 Linear Tube
Ballast Bypass - Double Ended
