12
MOMENTUM RB5 RECUMBENT BIKE
ASSEMBLY
STEP 1:
First connect the Computer Wire - Upper (72) to the Computer Wire - Middle (74) and the
Hand Pulse Wire - Upper (71) to the Hand Pulse Wire - Middle (73). Then attach the
Computer (42) to the Console Upright Tube (43) and secure using two M6 x 15mm Bolts
(44).
Attach the Handlebar – Left (48) to the Console Upright Tube (43) and secure using three
M8 x 10mm Bolts (27). Attach the Handlebar – Right (50) to the Console Upright Tube (43)
and secure using three M8 x 10mm Bolts (27).
NOTE:
Make sure all wires are recessed into the tube, do not trap or pinch any of the wires.
x2
x6
71
72
74
71
73
72
48
42
50
44
73
74
27
43
27
