background image

www.greenmasterfitness.com.tw 

 

 

POWER REQUIREMENTS 

Power Requirements

 
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC 
SHOCK.  CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF Y OU ARE IN DOUBT AS TO WHETHER THE 
PRODUCT IS PROPERLY  GROUNDED.  DO NOT MODIFY  THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT 
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. 
 
This treadmill can be seriously damaged by sudden voltage changes in y our home’s electrical power.  Voltage spikes, surges and 
noise interference can result from weather conditions or f rom other appliances being turned on or off.  To reduce the possibility of 
treadmill damage, alway s use a surge protector (not included) with y our treadmill. 
 
This treadmill must be grounded to reduce the risk of electrical shock.  Grounding prov ides a path of least resistance f or electric 
current, should the treadmill malf unction.  This treadmill comes with an electrical cord hav ing an equipment-grounding conductor 
and a grounding plug.  Alway s plug the power cord into a surge protector, and plug the surge protector into an appropriate outlet 
that is properly installed and grounded in accordance with all local codes and ordinances. 
 
This product is f or use on a nominal 230-v olt circuit, and has a grounding plug that looks like the plug illustrated in the drawing 
below.

 

 

 

 

 

Summary of Contents for MOMENTUM T7








































Reviews: