GP1190
GP1001
GP1127
GP1312 - Right
GP1311 - Left
GP1157
GP1204
GP1202
GP1230
GP1227
GP1269
GP1231
GP1230
GP1216
GP1201
GP1204
GP1207
GP1360
GP1216
GP1358
GP1142
GP1215
GP1237
FRONT AXLE ASSEMBLY
8
Steering Arms: Fit the
steering arm GP1157 after
the stub axle and ensure
a minimum of 10mm is
threaded into GP1269
then locked in place with
GP1231.
Safe Steering: Tighten the
large nut & bolts (GP1202/
GP1207) until there is no
movement up/down but it
can still turn from side to
side easily, Some lubrication
is useful here.
Caution: The bearings inside
the wheels will be greasy. This
lubrication reduces friction helping
speed up your Goblin. Be sure to
use the correct wheel. The one
without bearings should be fitted to
the left rear.
Linch Pins: Be careful
when fitting the linch pins
(GP1190) as they will spring
shut. Mind fingers!
Go Faster: To
reduce friction
apply a little grease
to each side of
washers GP1001
and inflate tyres
to the maximum
pressure indicated
on the sidewalls.
This helps reduce
friction and rolling
resistance and
makes your Goblin
go faster! Do not
over-inflate tyres
as they may burst.
