✘
✔
✘
✔
✔
✔
GP1341
GP1365
GP1128
GP1138
2 x GP1005
GP1161
GP1139
GP1150
GP1205
GP1203
GP1206
GP1002
GP1128
GP1128
GP1291
GP1364
GP1192
GP1004
GP1004
GP1364
REAR AXLE ASSEMBLY LEFT
9
Note: Grub screws,
GP1005, packaged inside
GP1161, must be fully
tightened to clamp bush
to axle. Third hole is NOT
used. See diagram, left.
Keep it Tight: Where
Nyloc nuts are not used,
for example GP1002 and
GP1005 a little medium
strength liquid thread lock
can be used. This stops
things vibrating loose.
Search YouTube for tutorials.
Drive Wheel: Your Goblin
uses just one drive wheel
on the left rear of the car.
Power from the motor is
transferred to the wheel via
the roll pin, GP1004. So is
braking force - too much
hard braking risks wearing
out the tyre.
Roll Pin: Hammer the roll pin, GP1004, through
the axle before fitting the wheel. It needs to be
inserted until equal amounts show on each side
of the axle. ADULTS: This can take significant
force and care needs to be taken not to damage
the axle or cause injury. The axle should be well
supported.
