Green
spec
BV
Greenspec AFP Nano
line repeater
Art. nr. 200301
Greenspec AFP Nano line repeater
Art. nr. 200301
The Greenspec greenhouse automation system works with an optical
fibre cable that transmit the information through the greenhouse.
New is the AFP Nano unit, in three variations:
AFP Nano line repeater
AFP Nano line transmitter plus connector for the Thies WSC11
meteo station
:
the
AFP Nano meteo
AFP Nano line transmitter plus inbuilt temperature and relative
humidity sensor: the
AFP Nano Measurement box
These small practical units will help you in your greenhouse data
transmission. You connect them into the optical line and you connect
to a power supply.
The
AFP Nano line repeater
is an alternative to the AFP Lite. On the
next page a comparison.
The line repeater function is needed to keep the signal stable over a
longer distance. Up to 120 m in a greenhouse your signal is stable. But
at a longe distance place a Line repeater.
Installation is very easy:
Open the box.
Fix the optical cable on both sides of the Nano unit.
Make a connection to either 14
-
24V DC or 12
-
24 V AC, see the
orange circle. The polarity is not important.
Once you have powered the system and the optical line is
running, you see a signal on the unit. It should be a green LED,
then you know it works. Close the box.
AFP Nano Line transmitter datasheet V04 02
-
2016
