Maintenance and disposal
15
Manual CAS 500
EN
1.
Switch off and unplug the device from the socket.
Do not touch the plug or the device with damp or wet hands. Otherwise, there is a threat of electric
shock.
Wear gloves and a mask! Otherwise, there is a risk of exposure to contamination, viruses,
bacteria and similar potential hazards.
2.
Open the front plate as described in the chapter
3.
Now carefully extract the filters.
4.
Put the replacement filters into the device in the same order as before extraction. There are numbers and
direction instructions on the filters.
5.
Again, complete the respective steps described in the chapter
in order to close the front plate
properly.
6.
Put the used filter into the remaining bag of the new filter, seal the bag and immediately dispose of it in
your domestic waste. If you notice that any of the parts on or in the device not listed here are missing or
damaged, please contact your local retailer or manufacturer.
7.
Then press the ‘RESET’ button on the control panel for 5 seconds in order to confirm replacement of the
filters and to reset the counter.
Storage
The following storage conditions must be ensured when the device is not in use:
-
Take the batteries out of the remote control and store the batteries separately from the remote control.
-
Unplug the device before storing it.
-
Clean the air purifier and particle sensor as explained in the chapter
. Let all parts dry thoroughly
before moving to the next step.
-
Store the device in a cool and dry place and protect it from both heat and frost.
-
Cover the device with a cover or cloth. Ensure that the device is not connected to a plug socket before
covering it.
-
Before using the device again, check the condition of the power cable. If in doubt, contact customer
services about the condition of the cable.
Disposal (Life-Cycle Service)
As with other electrical and electronic devices, this device must not be disposed of in domestic waste
due to the symbol showing a crossed-out waste bin.
Here at
greentec
, we want to promote the reuse of recyclable materials. As part of our
Life-Cycle Service
,
we check the recycling options of old materials in our production chain. Please visit our website at
www.greentec.ag for more information about options and locations for returns.
Help us to improve the recycling of old devices and to avoid negative consequences for the environment and
human health by disposing of your device properly at the end of its lifespan or returning it to us!
2
Activated carbon & cold catalyst compound filter
3
HEPA-13 & antibacterial compound filter
2
3
