Greentec HS172-212-242 Cutterbar
29
Mounting a section
►
Position the new section on
the knife.
►
Insert the serrated stud bolts
from above.
Always use
new
serrated stud
bolts!
►
Tighten the nuts to the
specified tightening torque.
►
Push the double guard back
►
Insert the bolts.
►
Tighten the nuts to the
specified tightening torque.
Changeing knives
If the sections are excessively worn, the entire knife must be replaced.
Removing knives
►
Align the knife stroke so that
the bolts on the head bearing are
on top.
►
Unscrew the bolts on the knife
head.