Greentec HS172-212-242 Cutterbar
38
►
Position the two guards
correctly on the wear plate.
►
Insert the bolts.
►
Tighten the nuts to the specified
tightening torque.
Replacing the knife head
If the knife head is bent, damaged or deformed, it must be replaced immediately.
Removing the knife head
►
Align the knife stroke so that
the bolts on the head bearing are
on top.
►
Unscrew the bolts on the knife
head.
►
Unscrew the bolts on the head
bearing.
►
Remove the knife head from
the sections. Watch out for loose
sections.