2 / 12
gSKIN
®
U-Value KIT: Instruction Manual
green
TEG
AG
Hofwisenstr. 50A
8153 Rümlang, Switzerland
T: +41 44 515 09 15
info@greenTEG.com
greenTEG.com
2.
General overview of the gSKIN® U-value software
The gSKIN
®
U-value software is built upon a home screen with 5 functional buttons and 2 top-menu buttons
(see Figure 2).
5 functional buttons
in the centre of the home screen:
1.
Real time measurement
: This button allows the user to review all data points measured by the sensors
of the U-value KIT (temperature, heat flux, calculated U-value) in real-time. With this menu-screen, one
cannot start a new U-value measuring process
–
it can only be used once for reviewing all sensors that
are working and to show their real-time values.
2.
Start logging
: From here, you can start your measuring process. Before starting, please select the
frequency at which you would like to log your data points and when you want to start the measurement
process (logger stores up to two million data points; for details, please refer to Appendix B).
3.
Read record
: Via this button, you can select measurement files that have been saved on your logger for
further analysis (e.g. export raw data, print PDF reports).
4.
Analyse record
: Here, you can search for other logger protocol files (*.msr) which have been saved on
your computer.
5.
Exit
: This button will close the program.
Two top-menu buttons:
1.
Menu-button
“
File
“
:
This button c
an be used to end the program (“Exit”
), to export data while you
review data points in the
“
Read record
”
tab or change the language.
2.
Menu-button
“
Logger
”
: This button can be used to stop your measurement process and to delete all
measurement files from the data
logger (“
Delete all stored data!
”)
.
Figure 2: Home screen view with data logger connected to your laptop.
