6 / 12
gSKIN
®
U-Value KIT: Instruction Manual
green
TEG
AG
Hofwisenstr. 50A
8153 Rümlang, Switzerland
T: +41 44 515 09 15
info@greenTEG.com
greenTEG.com
Figure 5: Software screen for saving data as a PDF file.
12.
On
the “Read record” > “Analysis”
window
, you can select under the “
File
”
menu-button
“Export
data…”
to save the raw data as a CSV file to your laptop (note: If you need further advise in exporting data please
have a look in our FAQ:
https://www.greenteg.com/faq-heat-flux-sensing.
13.
To review other data logger files stored on your laptop, you can select these files via your
home screen
by using the
“
Analyse record
”
button (see Figure 2).
4
14.
For erasing stored data on your data logger, you can ONLY erase/delete all data saved on the data
logger by selecting in the top menu “Logger” and
then
“
Delete all stored data
!”. There is no option to
retrieve deleted data, unless you have stored it before as a CSV/msr file on your pc (see step 12).
15.
To close the U-value software, you can select the
“
Exit
”
button on your home screen
or the tab “
File
” and
“
Exit
” function. In case you have already started a
U-value measuring process, this activity will not be
stopped. Only by selecting the
“Logger”
function on your home screen
and there selecting “Sto
p
measurement
”
one can end a U-value measuring process (see step 7).
16.
To demount the heat flux sensors a few important things should be considered (also see figure 6):
-
Only pull at the strips of the adhesive tape in direction of the tape itself.
-
DO NOT pull at the cable.
-
Do NOT pull at the strips perpendicular to the wall.
Be careful when removing the tape, since the tape can damage the wall when removing it too fast or
wrong.
4
Every stopped measurement will automatically be saved on your computer under C:\Users\<User>\Documents\greenTEG\data
as an .msr-file.
