9
4. Select the Display Language
When your Display powers on for the first time, it prompts you to select a
language. Press the up and down buttons (
) to scroll through the available
languages, and then press the select button (
) when the screen shows your
preferred language.
5. Connect to the Gateway
Note: If your Display came as part of a package that includes a Gateway, then you can skip this step since the
Display was already connected to the Gateway at the factory.
If your Display does not already have an established network connection with
your Gateway, then NO CONNECTION appears on the screen. To connect the
Display to your Gateway, you must place your Gateway in network inclusion
mode and then press the activation button (
) on the Display. For specific
instructions, refer to the Common Z-Wave Tasks chapter and follow the network
inclusion process.
When the Display connects successfully, the screen shows the message CONNECTED. If the connection
process should fail, the screen shows the message UNSUCCESSFUL. If this happens, you can press the select
button (
) to try connecting again.
Summary of Contents for DE220-1
Page 2: ...In Home Display DE220 1 DE220 1 A...
Page 7: ......
Page 39: ...www greenwavereality com...
