30
Connected Lighting
Step 5: Set up Light Bulbs in Application
With your light bulbs, Gateway, and application installed, you can use your smart device to set up the lights on
your network:
1. Open the application on your smart device. The application
automatically finds the light bulbs connected to the
Gateway and prompts you to set them up:
2. Tap
Yes
. Your smart device then walks you through setting
up each new light bulb.
3. Look for the light bulb that is dimming and fading. This is the light bulb you are currently configuring
on your smart device.
4. The setup wizard guides you through specifying a name light, assigning a room for the light, and
selecting an icon (or taking a picture of the light) to help identify the light.
5. Repeat these steps for each flashing light bulb.
Note: If you skip setting up light bulbs during installation, the light bulbs automatically get grouped under the
black room color. You can update the light bulb settings any time using the information in the Smart Device
Application chapter.
Step 6: Prepare the Remote Control (Optional)
If you will be using the remote control with your lighting network, then you must also prepare it for use. Refer to
the steps in the Remote Control chapter. Also, if you are upgrading from a remote control lighting kit, then you
must manually connect the old remote control to your Gateway. These steps are also provided in the Remote
Control chapter.
Installation Tips
Review the safety information.
Be sure to review the information contained in the Safety Information chapter
for important safety information you should follow.
Keep radio signals clear.
Your Gateway and network lighting have antennas built-in for radio communication
with Internet services and other devices on your energy management system. Just as you might experience
reception problems on your mobile phone inside a building, your Gateway can have trouble communicating with
the network lighting if their radio signals are blocked by obstacles such as large metal panels or walls containing
wire mesh. When placing these devices in your home, imagine invisible lines connecting between them. Try
to keep these lines clear from obstruction as much as possible. Also place your Gateway at least 5 feet (1.5
meters) above floor level to promote reception.
Summary of Contents for GL30000
Page 1: ...Connected Lighting...
