I n t r o d u c t i o n
P o w e r N o d e s U s e r G u i d e
| 4
The indicator may display the following patterns and colors:
Off (no color):
All PowerNode ports are powered off.
Steady white in center:
All PowerNode ports are powered on.
Steady green in center:
Some ports on a multi-port PowerNode are powered on while
some are off. If you are expecting all ports to be powered on, access your online
account to verify your PowerNode and device settings and check their schedule.
Two flashing green bars on each side of white flashing center:
The PowerNode
cannot communicate with the Gateway and may be out of range. You can move the
PowerNode closer to the Gateway or add additional PowerNodes closer to the Gateway.
The PowerNodes can piggyback on each other’s network connection.
Two green bars rotating clockwise:
The PowerNode is in inclusion mode to sync with
the Gateway.
Two green bars rotating counter-clockwise:
The PowerNode is in exclusion mode to
disconnect from Gateway.
All steady green bars forming a circle:
Inclusion or exclusion process was successful.
The bars remain green for several seconds.
All flashing green bars forming a circle:
Inclusion or exclusion process was
unsuccessful.
Steady red in center:
Over-current protection on the PowerNode is activated. Unplug
the attached device that caused the issue. Reset power by unplugging and replugging
the PowerNode into the electrical outlet.
