background image

 

WARNING

If the battery pack cracks or breaks, with or without

leaks, do not recharge it and do not use. Discard it

and replace with a new battery pack. DO NOT TRY

TO REPAIR IT! To prevent injury and risk of fire,

explosion, or electric shock, and to avoid damage to

the environment:
• Cover the terminals of the battery with heavy-duty

adhesive tape.

• DO NOT try to remove or destroy any of the

battery pack components.

• DO NOT try to open the battery pack.
• If a leak develops, the released electrolytes are

corrosive and toxic. DO NOT get the solution in the

eyes or on skin, and do not swallow it.

• DO NOT put these batteries in your regular

household trash.

• DO NOT incinerate.
• DO NOT put them where they will become part of

any waste landfill or municipal solid waste stream.

• Take them to a certified recycling or disposal

center.

8

UNPACK THE MACHINE

 

WARNING

Make sure that you correctly assemble the machine

before use.

 

WARNING

• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the

service center.

1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with

local regulations.

8.1

ATTACH MACHINE TO SHOULDER

STRAP

1

2

1

2

2

1

1. Attach the carabiner to the carrying ring on the drive

tube.

2. Put on the shoulder strap.
3. Adjust the length of the strap so that the carabiner is

about a hand’s width below your right hip.

5

English

EN

Summary of Contents for 82PH20T











Reviews: