background image

1

PURPOSE

This machine is used for domestic lawn mowing. The

cutting blade must be approximately parallel to the

ground. All four wheels must touch the ground while you

mow.

2

OVERVIEW

 

  

1

Start button

2

Upper handle

3

Lower handle

4

Bail switch

5

Self-propel lever

6

Speed control button

7

Height adjustment lever

8

Battery door

9

Side discharge door

10

Grass catcher

11

Mulch plug

12

Side discharge chute

3

READ ALL INSTRUCTIONS

 

DANGER

This machine was built to be operated according to

the rules for safe operation included in this manual. As

with any type of power equipment, carelessness or

error on the part of the operator can result in serious

injury. This machine is capable of amputating hands

and feet and throwing objects. Failure to observe all

safety instructions could result in serious injury or

death.

 

NOTE

When using electric lawn mowers, basic safety

precautions should always be followed to reduce the

risk of fire, electric shock, and personal injury. These

basic precautions include the following:

3.1

CHILDREN AND BYSTANDERS

Tragic accidents can occur if the operator is not alert to

the presence of children or bystanders.
• Keep the area of operation clear of all persons,

particularly small children, and pets.

• Use extreme care when approaching blind corners,

doorways, shrubs, trees, or other objects that may

obscure your vision of a child or bystander. Keep

children, bystanders, helpers and pets at least 100

feet (30m) from the mower while it is in operation.

Stop the machine if anyone enters the area.

• Never allow children under 14 years old to operate a

power mower. Operators 14 years old and over

should fully read and understand the operator’s

manual and safety rules. Only responsible

individuals who are familiar with these rules of safe

operation should be allowed to use this machine.

3.2

GENERAL OPERATION

• Read this operator’s manual carefully in its entirety

before assembling or operating this machine. Read,

understand, and follow all instructions on the

machine and in the manuals before operation.

Familiarize yourself with the controls and proper use

of this machine before operation. Save this manual

for future and regular reference.

• Do not use the lawn mower for any job except that

for which it is intended. Your lawn mower has been

designed to perform only one job: cut grass.

• Don’t force the lawn mower, it will do the job better

and more safely at the rate for which it was

designed.

• Don’t overreach, keep proper footing and balance at

all times. Many injuries occur as a result of the

mower being pulled over the foot during a fall

caused by slipping or tripping. A slip and fall can

cause serious personal injury. If you feel you are

losing your footing, release the control handle

immediately and the blade will stop rotating within

three seconds.

• Never pull the mower back toward you while you are

walking. If you must back the mower away from a

wall or obstruction, first look down and behind you to

avoid tripping, and then follow these steps:
• Step back from the mower in order to fully

extend your arms.

• Be sure that you are well balanced.
• Pull the mower back slowly.

2

English

EN

Summary of Contents for 2502402
















Reviews: