6.3
INSTALL THE UPPER HANDLE
3
12
11
1. Align the holes in the upper handle (3) and the lower
handle.
2. Put the cam locks (11) through the holes.
3. Tighten the knobs (12) onto the cam locks.
4. Do the same operation on the other side.
6.4
INSTALL THE GRASS CATCHER
5
12
9
1. Remove the mulch plug.
2. Open the rear discharge door (5) and hold it.
3. Hold the the grass catcher (9) by its handle and put
the hooks over the slots (12).
4. Close the rear discharge door.
6.5
INSTALL THE MULCH PLUG
5
10
1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (10) by its handle and fit it in
the discharge chute.
4. Close the rear discharge door.
6.6
SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
6
1. Push the height adjustment button (6), move the
height adjust gear to a higher position to increase
the cutting height.
2. Push the height adjustment button, move the height
adjust gear to a lower position to decrease the
cutting height.
9
English
EN
