10.2 INSTALL THE TRIGGER HANDLE
11
6
1. Move the trigger handle (11) onto the connecting tube
(6).
2. Use knob to tighten the screw.
10.3 INSTALL THE CONNECTING
TUBE
12
13
1. Align the rib (12) on the connecting tube with the slot
(13) in the flexible tube.
2. Put the end of the connecting tube (6) into the flexible
tube.
3. Push the connecting tube into the flexible tube.
4. Put the hose clamp (14) around the flexible tube.
14
5. Install and tighten the available screw into the hose clamp
(14).
10.4 INSTALL THE REAR BLOWER
TUBE
5
6
1. Align the grooves on the rear blower tube (5) with the
tabs on the connecting tube (6).
7
English
EN
Summary of Contents for BLC463
Page 2: ......