6.4
INSTALL THE GRASS CATCHER
17
8
16
5
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door and hold it.
4. Hold the the grass catcher (8) by its handle and engage
the hooks (16) on the door rod (17).
5. Close the rear discharge door.
6.5
INSTALL THE MULCH PLUG
5
9
1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (9) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
6.6
INSTALL THE SIDE DISCHARGE
CHUTE
18
11
10
CAUTION
When you use the side discharge chute,
•
Do not install the grass catcher.
•
Keep the mulch plug installed.
1. Open the side discharge door (10) and hold it.
2. Line up the recesses of the side discharge chute (11)
below the pivot (18).
3. Close the side discharge door (10).
6.7
SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
6
1. Pull the height adjustment lever (6) rearward to increase
the cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
9
English
EN