GreenWorks Tools 2201207, User Manual

DE

FR EN

ES IT

PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG

EN

FR

DE ES IT

PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG

English (Original instructions)

speCifiCations

Model

2201207

Voltage

24 volts

No load speed

2800 SPM

Blade speed

2800 SPM

Blade length

470 mm

Cutting capacity

17 mm

Measuered sound 

pressure level

78 dB(A), k=3

Guaranteed sound power 

level

94 dB(A)

Vibration level

<2.5 m/s

²

, k=1.5 m/s

²

Weight with battery pack

2.6 kg

DesCription

1. 

Blade cover

2. 

Blade

3. 

Guard

4. 

Front handle

5. 

Rear handle

6. 

Battery pack

7. 

Rear trigger

8. 

Front trigger

operation

For complete charging instructions, refer to the Operator’s 

Manuals for your battery pack and charger models.

note

: To avoid serious personal injury, always remove the 

battery pack and keep hands clear of the lock-out button 

when carrying or transporting the tool.

install BatterY paCK 

See figure 2

.

„

Place the battery pack in the hedge trimmer. Align 

raised rib on battery pack with groove in hedge trimmer. 

„

Make sure the latch on the battery pack snaps in place 

and that battery pack is secured in hedge trimmer 

before beginning operation.

reMove BatterY paCK

„

Locate the latch on the battery pack and depress to 

release the battery pack from the hedge trimmer.

„

Remove battery pack from the hedge trimmer.

Caution

When placing battery pack in your hedge trimmer, 

be sure raised rib on battery pack aligns with groove 

in hedge trimmer and latch snaps in place properly. 

Improper assembly of battery pack can cause damage 

to internal components.

startinG tHe HeDGe triMMer 

See figure 3.

„

Remove the blade cover.

„

Hold the hedge trimmer with both hands, one hand 

to squeeze the front trigger, and the other hand to 

squeeze the rear trigger.

stoppinG tHe HeDGe triMMer

„

Release both the front trigger and the rear trigger to 

stop the hedge trimmer.

„

Remove battery pack from the hedge trimmer.

operatinG tips

„

Do not force the hedge trimmer through heavy 

shrubbery. This can cause the blades to bind and slow 

down. If the blades slow down, reduce the pace.

„

Do not try to cut stems or twigs that are larger than 15 

mm thick, or those obviously too large to feed into the 

cutting blade. Use a non-powered hand saw or pruning 

saw to trim large stems.

„

If desired, you can use a string to help cut your hedge 

level. Decide how high you want the hedge. Then, 

stretch a piece of string along the hedge at this height. 

Trim the hedge just above this guide line of string. 

See 

Figure 4

. Trim the side of a hedge so that it will be 

slightly narrower at the top. 

See Figure 5.

 More of the 

hedge will be exposed when shaped this way, and it 

will  be  more  uniform.  If  blades  do  become  jammed, 

stop the motor, allow the blades to stop and remove 

the battery pack before attempting to remove the 

obstruction.

„

Wear gloves when trimming thorny or prickly growth. 

When trimming new growth, use a wide sweeping 

action, so that the stems are fed directly into the cutting 

blade. Older growth will have thicker stems and will be 

trimmed easiest by using a sawing movement.

14