background image

Problem

Possible cause

Solution

The motor is on,

blades do not

move.

The machine has

damage.

Do not use the ma-

chine and speak to

service center.

The blades are

blocked.

Remove battery

pack then clear

blockage from the

blades.

There is too much

noise and/or vibra-

tion during opera-

tion.

The parts are loos-

en.

1. Stop the ma-

chine.

2. Remove the

battery.

3. Inspect for

damage.

4. Check and

tighten loose

parts.

The parts have

damage.

Do not use the ma-

chine and speak to

service center.

13

TECHNICAL DATA

Voltage

40V

No load speed

2800

(±10%) /min

Blade speed

2800(±10%) /

min

Blade length

610 mm

Cutting capacity

27 mm

Weight (without battery pack)

2.7 kg

Measuered sound pressure level

78.6 dB(A),

K

PA

=3 dB(A)

Guaranteed sound power level

100 dB(A)

Vibration

<2.5 m/s

2

Uncertainty

1.5 m/s

2

14

WARRANTY

(The full warranty terms and conditions can be found on

Greenworks webpage)
The Greenworks warranty is 4 years on the product, and 2

years on batteries (consumer/private usage) from the date of

purchase. This warranty covers manufacturing faults. A faulty

product under warranty might be either repaired or replaced.

A unit that has been misused or used in other ways then

described in the owner’s manual might be rejected for

warranty. Normal wear, and wear parts are not considered as

warranty. The original manufacturer warranty is not affected

by any additional warranty offered by a dealer or retailer.

A faulty product must be returned to the point of purchase in

order to claim for warranty, together with the proof of

purchase (receipt).

6

English

EN

Summary of Contents for 2200907AU









Reviews: