background image

1

0

UNPACKING

This product requires assembly.

 Carefully remove the product and any accessories from the box. Make sure that all items 

listed in the packing list are included.

 Inspect the tool carefully to verify no breakage or damage occurred during shipping.

 Do not discard the packing material until you have carefully inspected and satisfactorily 

operated.

 If any parts are damaged or missing, please call 

1-888- 909-6757

 for assistance.

PACKING LIST

 

Cultivator

 

Hitch Pins (2)

 + U shape Hitch Pins(2)

 

Inner Tines (2) 

 

Outer Tines (2)

 

Felts (

2

 

Wheel Assembly 

 

Operator’s Manual

W A R N I N G

If any parts are damaged or missing, do not operate this product until the parts are replaced. 

Failure to heed this warning could result in serious personal injury.

W A R N I N G

Do not attempt to modify this tool or create accessories that are not recommended for use with 

condition that may lead to serious personal injury.

W A R N I N G

Do not insert the battery into unit until assembly is complete. Failure to comply could result in 

accidental starting, and possible serious personal injury.

ASSEMBLY

Summary of Contents for 2800100

























Reviews: