3
Cleaning floor surface
Fastern the surface cleaner to the high pressure 1/4 inch
quick connect spray wand. See fig 2
1. Pull back the quick-connect collar
2. Push the surface cleaner into place
3. Push the collar forward.
4. Pull the trigger gun to operate the machine
Tips for cleaning
■
Outdoor surfaces should be swept before the surface
cleaner is used to avoid damaging the high pressure
nozzles.
■
The surface cleaner is not suited for scouring or
scrubbing.
■
If striping or swirl marks occur, slow your pace.
■
If striping or swirling continues, the surface cleaner
nozzle(s) may be clogged. Disconnect surface cleaner
from pressure washer spray wand before servicing.
Using a straightened paper clip or nozzle cleaning tool
(not provided), free any foreign materials clogging or
restricting the nozzle.(See Fig.3)
Cleaning tool
Caution
See fig 4
Do not run over free standing corners. DO NOT lift or
tilt the surface cleaner from a horizontal surface while
connected to the spray gun during operation.
GENERAL INFORMATION
Care
fig.3
fig.4
Use a moist cloth and clean surface cleaner after use.
