8
OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
8.1
START THE MACHINE
NOTE
The machine can not work until the forward / reverse switch
is pushed fully to the left or right. Do not operate the
machine at low speeds for extended periods of time.
1. Pull the trigger to turn the machine ON.
Variable speed
The machine has a variable speed switch that delivers higher
speed with increased trigger pressure and lower speed with
decreased trigger pressure.
8.2
STOP THE MACHINE
1. Release the trigger to turn the machine OFF.
WARNING
Release the trigger and allow the machine to come to a
complete stop.
8.3
FORWARD / REVERSE SWITCH
The machine has the switch(forward/reverse) above the
switch trigger to change the rotation.
1. When the switch is on the left side of the switch trigger,
the bit direciton is forward (tightening).
2. When the switch is on the right side of the switch trigger,
the bit direction is reversed (loosening).
3. Put the forward/reverse siwtch in the OFF (center lock)
position to help decrease the possibility of accidental
starting when not operating.
WARNING
Release the trigger and allow the machine to come to a
complete stop.
WARNING
Let the chuck to come to a complete stop before changing
the direction of rotation.
NOTE
The machine does not operate until the forward / reverse
switch is pushed fully to the left or right.
8.4
ADJUST THE DEPTH ROD
1. Push forward / reverse switch in "neutral" position to lock
the trigger.
2. Push the rod adjustment button.
3. Adjust the depth stop rod to get the necessary drilling
depth.
4. Release the rod adjustment button.
8
English
EN
