background image

8

MAINTENANCE

 

CAUTION

Do not let brake fluids, gasoline, petroleum-based materials

touch the plastic parts. Chemicals can cause damage to the

plastic, and make the plastic unserviceable.

 

CAUTION

Do not use strong solvents or detergents on the plastic

housing or components.

 

WARNING

Remove the battery pack from the machine before

maintenance.

8.1

CLEAN THE MACHINE

 

CAUTION

The machine must be dry. Humidity can cause risks of

electrical shocks.

• Clear the unwanted material out of the air vent with a

vacuum cleaner.

• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a

moist and soft cloth.

9

TECHNICAL DATA

Voltage

24 V

Motor

Brushless

No Load Speed

0 - 2800 RPM

Torque

2666 In-lbs. / 300 N.m

Weight Without Battery

2.6 lbs ( 1.18 kg)

Battery Model

BAG711 and other BAG ser-

ies

Charger Model

29862 / 29972

The recommended ambient temperature range:

Item

Temperature

Appliance storage tempera-

ture range

32°F (0°C) - 158°F (70°C)

Appliance operation temper-

ature range

32°F (0°C) - 104°F (40°C)

Battery charging temperature

range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-

ture range

39°F (4°C) - 104°F (40°C)

Item

Temperature

Battery storage temperature

range

32°F (0°C) - 73°F (23°C)

Battery discharging tempera-

ture range

32°F (0°C) -  113°F (45°C)

10

LIMITED WARRANTY

YEAR 

ANS 

AÑOS

LIMITED WARRANTY

GARANTIE LIMITÉE

GARANTÍA 

LIMITADA

3

Greenworks hereby warranties this product, to the original

purchaser with proof of purchase, for a period of three (3)

years against defects in materials, parts or workmanship.

Greenworks, at its own discretion will repair or replace any

and all parts found to be defective, through normal use, free

of charge to the customer. This warranty is valid only for

units which have been used for personal use that have not

been hired or rented for industrial/commercial use, and that

have been maintained in accordance with the instructions in

the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper

maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline,

at 1-888-909-6757.

TRANSPORTATION CHARGES:

Transportation charges for the movement of any power

equipment unit or attachment are the responsibility of the

purchaser. It is the purchaser’s responsibility to pay

transportation charges for any part submitted for replacement

under this warranty unless such return is requested in writing

by Greenworks.

USA address:

Canadian address:

Greenworks Tools

Greenworks Tools Canada Inc.

9

English

EN

Summary of Contents for IS24L00





























Reviews: