2.4
POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do
the job better and safer at the rate for which it was
designed.
•
Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
•
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean and
free from oil and grease.
Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
2.5
BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
•
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may create
a risk of injury and fire.
•
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the
battery terminals together may cause burns or fire.
•
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
•
Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or temperature
above 130 °C(266 °F) may cause explosion.
•
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
2.6
SERVICE
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
•
Never service damaged battery packs.
Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
3
SAFETY WARNINGS
• Understand the product. Read and follow the instructions
in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged.
• Use and store indoor dry environment.
• Maintain good housekeeping and sufficient lighting in the
working area.
• Cleaning and user maintenance shall not be made by
children.
• Use attachments/accessories specified by the
manufacturer.
• Perform service maintenance by qualified personnel only.
• When the tool is not in use or before performing cleaning,
turn it off and remove the battery pack.
• Do not leave the tool unattended while in use or directly
after use.
• Do not overreach. Keep proper footing and balance at all
times.
• Keep handles and grasping surfaces dry, clean and free
from oil and grease.
• Keep hair, loose clothing, finger and any parts of body
away from ejection port, openings or moving parts.
• To reduce the risk of electric shock, do not use near water
or any liquid.
• Do not touch with wet hands.
• Do not expose the tool to rain or wet conditions. Water
entering a power tool will increase the risk of electric
shock or product failure.
• Do not operate electric tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
• Maintain labels and rating plate through the life of
service.
5
English
EN
