14
05.2012
Tetra
Subject to technical modifications
Safety
1.12 Ballast calculation
WARNING
Risk of accident due to inadequate steering and braking power and stability caused
by incorrectly configured ballast offset.
Incorrectly configured or absent ballast offset may negatively affect the steering, braking
and stability of the tractor.
• The tractor/implement combination must never be used without the calculated front or
rear ballasting.
See the Appendix for the calculation formulas.
• Never use the tractor/implement combination if the weight or axle load exceeds the
permitted values for the tractor or tyres.
1.13 Safety instructions - Travelling by road / transport
WARNING
Risk of accident while transporting the implement by road.
• Pay attention to national laws and regulations on the use of public highways.
• Ensure that the lights on your implement are in an excellent condition.
An implement with defective lighting is not roadworthy.
• Lock the hydraulic control devices to prevent accidental operation, before each journey by
road.
• Before moving off, check the immediate vicinity. No item or person may be in the
immediate vicinity.
• The operator must not leave the operator's platform while the vehicle is in motion.
Risk of accident due to unsecured attachment components.
• Secure all components of the attachment to prevent uncontrolled movements, using the
retaining system provided (transport lock) or other suitable measures.
• Always use the supplied covers (e.g. tine protection equipment).
Risk of accident due to wide working radius of the implement.
During cornering, the wide working radius of the implement can cause accidents.
• When cornering and making turns, pay attention to obstacles and the traffic situation.
Risk of tipping due to the large centrifugal mass of the implement.
When cornering, the large centrifugal mass can cause the implement to tip over.
• Drive slowing when cornering and in turns.
1.14 Safety instructions - Field use
WARNING
Risk of accident while using the implement in the field.
• Prior to starting work, familiarize yourself with all equipment and operating controls and
their functions.
• Before start-up, check the immediate vicinity. No item or person may be in the immediate
vicinity.
• Only perform adjustment work with the implement lowered.
WARNING
Risk of accident due to objects being ejected.
• Before start-up, check the immediate vicinity. No item or person may be in the immediate
vicinity.
Summary of Contents for Tetra 3001 L
