G AT E & E N V E LO P E
Mute effect
Fade effect
(slow envelope)
(fast envelope)
VOLUME knob
Master volume control for the synthesizer’s
Audio Out
ENV switch
Controls the behavior of the stomp switch
and
Gate In
jack
The envelope generator is an attack-release
type (AR) with equal attack and release
time.
Stomp switch
Mutes the audio output, or gives a fade-in /
fade-out effect, depending on the ENV switch
setting.
When the
Gate In
jack is used, the stomp
switch is still active, and toggles Gate on/off,
overriding the Gate In status.
** Use a moderate touch on the stomp
switch. (Don’t use your ying leap attack)
The
Gate In
jack allows you to switch the
sound of the pedal on and off from an
external analog controller. It has the same
function as the stomp switch.
Connect
Gate In
to the Gate Out of an analog
keyboard, or analog sequencer. You can also
patch it to an external LFO or envelope
generator.
Try self-patching the
Clock Out
jack to the
Gate In
jack. This makes the sound cycle on
and off automatically, and can be used for
rhythmic effects and tremolo effects. It works
best when ENV switch is in the UP position.
Gate In
jack signal specification:
< 2.5 volts : Gate OFF
> 2.5 volts : Gate ON
Gate Tips: Patching
8
Grendel Drone Commander
Classic Pedal
