background image

SKU 65076 

For technical questions, please call 1-800-444-3353. 

Page 4

Wear ANSI-approved safety goggles, 

5. 

heavy-duty work gloves, and dust 

mask/respirator during set up.
Use only lubricants and fuel recom-

6. 

mended in the engine manual or in 

the Specifications chart of this man-

ual.

engine precautions

Follow engine precautions and in-

structions in the included engine 

instruction manual.

operating precautions

1. 

carBon Monoxide 

Hazard 

using an engine indoors 

can kill you in 

Minutes. 

Engine exhaust contains carbon 

monoxide.  This is a poison you 

cannot see or smell. 

NEVER use inside a home or garage, 

EVEN IF doors and windows are 

open. 

 

Only use OUTSIDE and far away 

from windows, doors, and vents.
Keep children away from the equip-

2. 

ment, especially while it is operating.

Do not leave the equipment unat-

3. 

tended when it is running.  Turn off 

the equipment (and remove safety 

keys, if available) before leaving the 

work area.
Wear ANSI-approved safety glasses, 

4. 

hearing protection, and NIOSH-ap-

proved dust mask/respirator under a 

full face shield during use.
People with pacemakers should 

5. 

consult their physician(s) before 

use.  Electromagnetic fields in close 

proximity to a heart pacemaker could 

cause pacemaker  interference or 

pacemaker failure.  Caution is neces-

sary when near the engine’s magneto 

or recoil starter.
Use only accessories that are recom-

6. 

mended by Harbor Freight Tools for 

your model.  Accessories that may be 

suitable for one piece of equipment 

may become hazardous when used 

on another piece of equipment.
Operate the Log Splitter, with the 

7. 

wheels blocked, on a dry, level sur-

face capable of supporting the com-

bined weight of the Log Splitter and 

logs.
Do not tow the Log Splitter on roads 

8. 

or highways. This product is not 

D.O.T. compliant, and is not road 

legal.
Always make sure the hitch coupler 

9. 

is securely fixed to the vehicle before 

moving it. If the Coupler is not se-

cured properly, the link could come 

loose while the trailer is in motion, 

possibly causing property damage, 

SERIOUS PERSONAL INJURY, or 

DEATH.

Summary of Contents for 65076



















Reviews: