background image

SKU 65076 

For technical questions, please call 1-800-444-3353. 

Page 5

Never split a log that contains any 

10. 

foreign materials (nails, for example).
Never place your hands or body near 

11. 

a hydraulic fluid leak. High-pressure 

fluid can be forced under the skin 

resulting in serious injury.
Do not use on logs longer than 25” or 

12. 

with a diameter greater than 8”.
Wear ANSI-approved safety goggles, 

13. 

heavy-duty work gloves, steel-toe 

work boots and hearing protection 

during use.
Do not operate in explosive atmo-

14. 

spheres, such as in the presence of 

flammable liquids, gases, or dust.  

Gasoline-powered engines may ignite 

the dust or fumes.
Stay alert, watch what you are doing 

15. 

and use common sense when operat-

ing this piece of equipment.  Do not 

use this piece of equipment while 

tired or under the influence of drugs, 

alcohol or medication.
Do not overreach.  Keep proper foot-

16. 

ing and balance at all times.  This en-

ables better control of the equipment 

in unexpected situations.
Dress properly.  Do not wear loose 

17. 

clothing or jewelry.  Keep hair, cloth-

ing and gloves away from moving 

parts.  Loose clothes, jewelry or long 

hair can be caught in moving parts.
Parts, especially exhaust system 

18. 

components, get very hot during use.  

Stay clear of hot parts.
Do not cover the engine or equipment 

19. 

during operation.
Keep the equipment, engine, and sur-

20. 

rounding area clean at all times.

Use the equipment, accessories, etc., 

21. 

in accordance with these instructions 

and in the manner intended for the 

particular type of equipment, taking 

into account the working conditions 

and the work to be performed.  Use 

of the equipment for operations differ-

ent from those intended could result 

in a hazardous situation.
Do not operate the equipment with 

22. 

known leaks in the engine’s fuel sys-

tem.
This product contains or, when used, 

23. 

produces a chemical known to the 

State of California to cause cancer 

and birth defects or other reproduc-

tive harm.  (California Health & Safety 

Code § 25249.5, 

et seq.

)

When spills of fuel or oil occur, they 

24. 

must be cleaned up immediately.  

Dispose of fluids and cleaning materi-

als as per any local, state, or federal 

codes and regulations.  Store oil rags 

in a bottom-ventilated, covered, metal 

container.
Keep hands and feet away from 

25. 

moving parts.  Do not reach over or 

across equipment while operating.
Before use, check for misalignment 

26. 

or binding of moving parts, breakage 

of parts, and any other condition that 

may affect the equipment’s operation.  

if damaged, have the equipment 

serviced before using.

  Many ac-

cidents are caused by poorly main-

tained equipment.
Use the correct equipment for the 

27. 

application.  Do not modify the equip-

ment and do not use the equipment 

for a purpose for which it is not in-

tended.

Summary of Contents for 65076



















Reviews: