6. Continue to push and hold in the oven control knob for 5
seconds after pilot is lit. Repeat steps 4 and 5 if not lit.
7. Rotate the oven control knob to adjust burner flame to desired
Level. (Fig. 16)
Electronic Ignition:
1. Before lighting, check to make sure all the control knobs are
turned to OFF position.
2.
Make sure the main gas tank valve is open.
3.
Push and turn the oven control knob counterclockwise to
" "
position. (Fig. 14)
4.
Continue to push and hold in the oven control knob for 5
seconds and rotate the ignition button clockwise repeatedly
until burner lights. Repeat steps 3 & 4 if not lit. (Fig. 17)
16 I
P a g e
