4. When you are finished, click the
OK
button.
5. On the main menu, click
Apply Settings
.
Ethernet Configuration
You must specify the speed and direction of data transmission.
To specify how data will be transmitted:
1. On the main menu, click
Network
.
2. Enter the following (as necessary):
Auto Negotiate
With this option, the Ethernet port auto-negotiates the speed and duplex with the
hardware endpoint to which it is connected. This is the default.
If this option is not selected, complete the fields that become available:
Speed:
The speed of data transmission. The default setting is
100 Mbps
.
Duplex:
The direction of data transmission. The default setting is
Full
.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Server Configuration
The unit’s server values display when you select
Server
from the main menu. The following
sections describe the configurable parameters on the Server Settings page.
Figure 5-4
Server Settings
Summary of Contents for NetDirect
Page 1: ...NetDirect User Guide ...
