Operation
1 Lift the tab on the latch lever to allow the lock bar to be lifted to the
open position.
2 Place the blower tube into the loop and set the blower on the shelf.
Lower the lock bar into the latch until it is secure behind the latch
lever.
3 To lock, place a padlock on the back side of the latch lever to prevent it from opening.
(Padlock is not included with BP-03 kit )
The
GRIDIRON
Lifetime Guarantee
We want you to be a satisfied GRIDIRON customer forever, so we
stand behind our GRIDIRON products with a lifetime guarantee.
Performance Guarantee
If at any time, you are not completely satisfied with the performance of
your GRIDIRON product, we will correct or replace it.
Some Exceptions
The springs, shock cord elements, cutting edges, vinyl and plastic
protectors, and finish provided with your GRIDIRON products are
subject to normal wear and tear and are not covered by this guarantee.
GRIDIRON CTS
844-240-8695
www.gridironcts.com
info@gridironcts.com
©
2018 GRIDIRON CTS
All rights reserved
BP-03 REV 0 9/25/2019
insert padlock in this hole
(padlock not included )
Parts
Part #
Description
Qty
102055
bolt 3/8 x 1-1/4
2
102122
Spring (not shown)
1
102146
Double T-Nut - short
4
102426
Blower Loop Assembly
1
103074
bolt 5/16 x 5/8
12
103086
Double T-Nut - long
2
103098
Adjustable Retainer
2
103099
Back Bar
1
103100
Pivot Bracket
1
103101
Latch Base
1
103102
Latch
1
103103
Lock Bar
1
103105
Support shelf
1
0
Security Cone Nut
2
