background image

!

!

!

Version 01.18

4

2 Security

The safety and warning notes make a distinction between personal injury and damage to property. 

The signal word „Danger“ is used to indicate the risk of personal injury, while the signal word 

„Caution“ is used to indicate the risk of damage to property.

2.1  Safety and Warnings

 

 

Immediate danger to life and limb!

 

 

Immediate risk of product and environment!

 

Useful information and notes

•  Observe the applicable accident prevention regulations. 

•  Make sure that any installed electrical connections are disconnected from the mains supply 

during the assembly.

•  Close off a sufficient space around the assembly area.

•  Check any available scaffolds and installations in terms of their safety.

•  Observe the regulations applicable to dowel and fastening material.

•  Always work with undamaged and suitable tools.

•  Keep plastic films, packaging material as well as small parts away from children – risk of 

suffocation!

 

2.2  Intended use

Warranty claims are forfeited if damage is due to the non-compliance with the brochure or the 

attached document. Griesser AST GmbH does not accept liability for consequential damage.

Griesser AST GmbH does not accept liability for damage caused by incorrect installation.

Except for the actions described in the operating manual and the assembly instructions, the product 

may not be altered in any way, otherwise, all warranty claims will likewise become null and void

 

 

In winter, check products for formation of ice prior to

 

 

operation; do not operate if ice has formed.

Danger!

Attention

Sliding bi-fold shutters

Attenion

Summary of Contents for FSH1

















Reviews: