Installing Gas Tank Heat Shield
1. Assemble 2pcs longer gas tank heat shield
bracket A to gas tank heat shields using (2) 5/32 x
8mm Phillips head screws with (
2)
5/32 lock washers
from up to down (Fig. 16 A)
2. Assemble 2pcs shorter gas tank heat shield
bracket B to gas tank heat shields as above, but
assembly screws need to from down to up, finish
preassembly whole gas tank heat shield (Fig. 16 B).
3. Attach gas tank heat shield bracket A other end to
back panel using (2) 5/32 x 8mm Phillips head
screws with (2) 5/32 lock washers as shown (Fig. 17)
4. Attach gas tank heat shield bracket B other end to
cart frame using (2) 5/32 x 8mm Phillips head screws
with (2) 5/32 lock washers as shown (Fig. 18)
B
A
Figure 16
Figure 17
Figure 18
Figure 19
11
Installing Grease Cup
From grease back to pull out grease tray, remove the
packaging materials from it, then insert grease cup
into grease tray as shown (Fig.19). Push grease tray
back to grill.
Installing Rotisserie Heat Shield and
Rotisserie Burner Gas Collector
1. Remove(2) 5/32 x 8mm Phillips head screws from
rotisserie burner heat shield, then assemble this heat
shield to firebox back panel as shown. (Fig. 20)
Figure 20
300
200
100
50
700
600
500
400
C
350
250
150
50
F