background image

• Have your LP gas tank filled by a reputable 

propane gas dealer and visually inspected and re-
qualified at each filling. 

• Do not store a spare LP gas tank under or   
• near this appliance. 
• Never fill the tank beyond 80 percent full . If this 

information is not followed exactly a fire causing 
death or serious injury may occur. 

• Always keep LP gas tanks in an upright position. 
• Do not store (or) or use gasoline or other 

flammable vapors and liquids in the vicinity of this 
gas grill. 

• Do not subject the LP gas tank to excessive heat. 
• Never store an LP gas tank indoors. If you store 

your gas grill in the garage or other indoor 
location, 

always

 disconnect the LP gas tank first 

and store it safely outside. 
 
 
 
 
 
 

 

 

• Place dust cap on cylinder valve outlet whenever 

the cylinder is not in use.  Only install the type of 
dust cap on the cylinder valve outlet that is 
provided with the cylinder valve.  Other types of 
caps or plugs may result in leakage of propane.  

• LP gas tanks must be stored outdoors in a well-

ventilated area and out of reach of children. 
Disconnected LP gas tanks must not be stored in 
a building, garage or any other enclosed area. 

•  When your gas grill is not in use the gas must be 

turned off at the LP gas tank. 

• The regulator and hose assembly must be 

inspected before each use of the grill. If there is 
excessive abrasion or wear or if the hose is cut, it 
must be replaced prior to the grill being used 
again. 

• Keep the gas regulator hose away from hot grill 

surfaces and dripping grease. Avoid unnecessary 
twisting of hose. Visually inspect the hose prior to 
each use for cuts, cracks, excessive wear or 
other damage. If the hose appears damaged do 
not use the gas grill.  

Never

 light your gas grill with the lid closed or 

before checking to ensure the burner tubes are 
fully seated over the gas valve orifices. 

Never

 allow children to operate your grill. 

A tank of approximately 12 inches in diameter by 18-
1/2 inches high is the maximum size LP gas tank to 
use. 

You must use an OPD gas tank which offers 

an Overfill Prevention Device. 

This safety feature prevents the tank from being 
overfilled which can cause malfunction of the LP gas 
tank, regulator and/or grill. 
 
The LP gas tank must be constructed and marked in 
accordance with specifications of the U.S. Dept. of 
Transportation (DOT). In Canada, the LP gas tank 
must meet the National Standard of Canada ,Can 
CSA 

–B339 , Cylinders , spheres and Tubes for 

Transportation of Dangerous Goods and 
Commission . 
1. The LP gas tank must have a shutoff valve, 
terminating in an LP gas supply tank valve outlet, 
that is compatible with a Type 1 tank connection 
device. The LP gas tank must also have a safety 
relief device that has a direct connection with the 
vapor space of the tank. 
2. The tank supply system must be arranged for 
vapor withdraw. 
3. The LP gas tank used must have a collar to 
protect the tank valve. 
 

Proper Placement and Clearance of Grill  
Never

 use your gas grill in a garage, porch, shed, 

breezeway or any other enclosed area. Your gas grill 
is to be used 

outdoors only, 

at least 24 inches from 

the back and side of any combustible surface. Your 
gas grill should not be used under overhead 
combustible construction . Do not obstruct the flow of 
ventilation air around the gas grill housing. 
• Do not install this outdoor gas grill in or on 
recreational vehicles or boats 
• Keep outdoor gas grill area clear and free from 
combustible materials, gasoline and other flammable 
vapors and liquids 
• Do not obstruct the flow of combustion and 
ventilation air. Check for this each time prior to using 
grill. 

 Never

 connect an unregulated LP gas tank to your 

gas grill. The gas regulator assembly supplied with 
your gas grill is adjusted to have an outlet pressure 
of 11” water column (W.C.) for connection to an LP 
gas tank. 
• Only use the regulator and the hose assembly 
supplied with your gas grill. Replacement regulators 
and hose assemblies must be those specified in this 
manual. 

Precautions

 

Summary of Contents for 720-0670E




















Reviews: