CAUTION:
While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces
1. Open lid of shipping carton and remove top
sheet of cardboard. Lay cardboard sheet on floor
and use as a work surface to protect floor and grill
parts from scratches.
2. Remove packing materials from shipping carton.
3. You may slice the carton front corners with a
utility knife to lay open the carton front panel. This
will allow you to raise the grill head lid and remove
the components packed inside the head.
Note: Be sure to slide grease tray out of back
of grill head and remove all packaging from
tray.
4. Use the parts list to check that all parts have
been included.
5. Inspect the grill for damage as you assemble it.
Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, call:
For Assembly Questions, call 1-800-913-8999
8AM
– 5 PM PST, Monday through Friday.
Assembling Grill Cart
1. Attach four casters to bottom panel using (16)
1/4 x15mm Phillips head screws, (16) 1/4 lock
washers. Note: A is Swivel with Brake Caster, B is
swivel caster, C & D are straight casters. (Fig.1)
2. Attach left & right side panel to bottom panel
using (4) 5/32 x 8mm Phillips head screws with (4)
5/32 lock washers. (Fig.2)
3. Attach back panel to side panel & bottom panel
using (3) 5/32 x 8mm & (4) 1/4 x 10mm Phillips
head screws with (3) 5/32 &(4)1/4 lock washers.
(Fig.3)
4. Remove (4) 5/32 x 8mm Phillips head screws
from door handles firstly, then attach door handles
to doors. (Fig.4)
5. Attach doors to side panels using (8) 5/32 x
8mm flat head screws. (Fig. 5)
Figure 2
Figure 3
Figure 4
Figure 5
8
Assembly Instructions
Figure 1
A
B
C
D
