background image

25

8. Grimm Audio Limited Warranty

Grimm Audio CV (“Grimm Audio”) warrants this product to be free of defects in ma-
terial and workmanship for a period of one (1) year for parts and for a period of one 
(1) year for labor from the date of original purchase. This warranty is enforcable 
only by the original retail purchaser and cannot be transferred or assigned.

During the warranty period Grimm Audio shall, at its sole and absolute option, 
either repair or replace free of charge any product that proves to be defective on 
inspection by Grimm Audio or its authorized service representative. In all cases 
disputes concerning this warranty shall be resolved as prescribed by law. To obtain 
warranty service, the purchaser must first call or write Grimm Audio at the address 
and telephone number printed below to obtain instructions where to send the unit 
for service. All enquiries must be accompanied by a description of the problem. All 
authorized returns must be sent to Grimm Audio or an authorized Grimm Audio 
repair facility postage prepaid, insured and properly packaged. Proof of purchase 
must be presented in the form of a bill of sale or some other positive proof that the 
product is within the warranty period. Grimm Audio reserves the right to update 
any unit returned for repair. Grimm Audio reserves the right to change or improve 
design of the product at any time without prior notice.

This warranty does not cover claims for damage due to abuse, neglect, alteration or 
attempted repair by unauthorized personnel, and is limited to failures arising dur-
ing normal use that are due to defects in material or workmanship in the product.

In no event will Grimm Audio be liable for incidental, consequential, indirect or 
other damages resulting from the breach of any express or implied warranty, in-
cluding, among other things, damage to property, damage based on inconvenience 
or on loss of use of the product, and, to the extent permitted by law, damages for 
personal injury.

© 2011, Grimm Audio CV. All rights reserved 
Reproduction in whole or in part is prohibited.  
Specifications subject to change without notice.

Grimm Audio CC1 manual v1.1, 11/14/11

Summary of Contents for CC1





























Reviews: