Beijing Grinder Instrument Co., Ltd. Tel
：
010-82363430
Fax
：
010-82363435
25
M1-6
M1-5
X
Y
LP
Third step
：
insert the rotor
Forth step
：
close and lock well the grinding room
Fifth step
：
fasten the collecting bucket
5.12 Universal hopper
（
fig 5.12
）
The universal hopper is suitable for large amount of samples
Operation of universal hopper
：
First step
：
pull out the lock pin LP horizontal
and raise up the feed hopper plug Y.
Second step
：
open the cover of funnel X
Third step
：
start the instrument
Forth step
：
Feed the samples from feed port.
Fifth step
：
Close the cover of hopper X
Sixth step
：
put down the hopper plug Y
fig 5.12
5.13 Standard hopper
（
Fig 5.13
）
The application for standard hopper
Cable waste
Abandoned carpets
similar materials like straw and grass.
Similar materials like tree branch.
Operating method of standard hopper
：
fig
5.13
First step
：
start CM100M
Second step
：
feed the samples into hopper.
Third step
：
push the samples with feed shovel
Z
into grinding chamber.
Note
：
Wear cut-resistant safety gloves when you feed some long size samples.
Only the hopper plug can be used to assist to feed the sample,the instrument and
parts will be damaged if use assist tools.
It’s possible to cause personal injure if allow many shapes samples entry into the
hopper.
