Beijing Grinder Instrument Co., Ltd. Tel
：
010-82363430
Fax
：
010-82363435
3
1.0 Notes on the Manual
This manual covers all the contents of the CM100M directory,In order to operate safely,
please read the relevant parts of the manual.
This manual does not include repair information. If you need to repair, please contact
the supplier or GRINDER directly.
2.0 Safety
Multi-functional CM 100M, which is a unique and advanced product from Grinder,a
multi-functional mill combines three types:cutting type,cross beater type and rotor beater
type to one machine.
cutting type, which handles soft ,medium-hard ,tough, flexible and fibrous materials.
cross beater type, which can deal with the hard, brittle materials
.
rotor beater type, which can handle soft, tough materials
By replacing different type of grinding accessories can achieve three different grinding
functions to expand application scope greatly.The three kinds of grinding accessories are
modular design, which can replace each of them easily with short time.CM100M with
1500W three-phase frequency control motor and work in with transformer to make the
speed can be adjusted continuously from 500~4000rpm, so as to meet different grinding
requirements for different properties samples.
2.1 General instructions
As a user,be sure that you are authorized to use CM100M.Fully understand technical
documents before using.
Before operation new user must be trained by the skilled personnel or operate strictly
according to this instruction.
Read and fully understand the safety instructions before using.
Improper handling may cause personal injury and damage to the instrument. Please
pay attention to your personal safety.
Please ensure that unqualified personnel do not operate the equipment.
2.2 Warning
