Beijing Grinder Instrument Co., Ltd. Tel
：
010-82363430
Fax
：
010-82363435
4
Please pay your attention to the content of ‘Note’ in this manual to ensure your personal
safety and avoid damaging to equipment.
2.3 Repair
This manual does not include any repair information. For your safety, please contact
GRINDER company’s authorized agents or GRINDER technical service center for repair.
2.4 Safety instructions
Please use it normally
GRINDER shall not be liable for any personal injury or damage to the equipment due to
failure to comply with the safety instructions.
No changes can be made to the instrument, and use the accessories and accessories
approved by the GRINDER. Otherwise, any of our warranty commitments will no longer be
valid.
Packaging
Please keep the packing materials during the warranty period. Otherwise, we shall not be
able to guarantee your rights in case of packing complaint.
Transport
The machine may not be knocked, shaken or thrown during transport. So as not to
damage the electronic and mechanical parts of the instrument.
Temperature change
If CM100M is subjected to large temperature changes(such as in air transport), the
formation of condensate should be prevented to avoid damage to electronic and
mechanical components.
Packing list
Upon receipt of the goods, if you find any shortage or damage to the equipment, please
inform the transport company or contact the GRINDER (within 24 hours). Delayed
complaints may not be accepted.
Installation requirements
If the environment temperature is too high, too low or high humidity, it will be possible to
cause damage to the electronic parts or mechanical parts of the instrument, and the
performance will be unknown.
Power connection
