6
CLEANING FABRIC AND MICROFIBER SEATS
(For vinyl, leather, carpet, upholstery, and textured plastic.)
Caution:
always protect vulnerable surfaces and components with towel to
prevent inadvertent exposure. (I.e.- audio and video components, clear plastics,
and other sensitive materials)
1. Remove large debris and vacuum area to be cleaned.
2. With air hose disconnected, remove sprayer/lid from supply cup. Add Griot’s
Garage Interior Cleaner to reservoir. Secure sprayer/lid to reservoir and connect
air supply.
3. Turn liquid valve to vertical position, then, using a smooth overlapping motion,
spray area to be cleaned from the bottom up. Allow the Interior Cleaner to
dwell on the surface 10 to 15 seconds. Do not allow to dry on surface. For
severe contamination, gently scrub fabric with Griot’s Garage Ergo Wave Foam
Scrubber, Horsehair Interior Brush, or Nylon Carpet & Upholstery Brush.
4. Follow with an application of air only, by turning valve to horizontal position.
Begin with smooth overlapping motion followed with a wipe down, using a Griot’s
Garage Microfiber Interior Cloth.
CLEANING DASHBOARD AND HARD SURFACES
(For use on vinyl, plastic, and leather.)
1. Adjust air-regulator controls to recommended air pressure of 78 psi.
2. With air hose disconnected, remove sprayer/lid from supply cup. Add Griot’s
Garage Interior Cleaner to reservoir. Secure sprayer/lid to reservoir and connect
air supply.
3. Protect sensitive components with a towel to prevent inadvertent exposure.
(Electrical components, monitors, and clear plastics)
