5
Warning:
Disconnect air line from buffer.
Warning:
An inadequately tightened backing plate could cause the threaded
spindle to break causing damage to the tool and work-piece and possible injury to
the operator or bystanders.
6. Power Tool Specifications
Type
Air Micro Rotary Polisher
Motion
Rotary – Direct Drive
Pad Size
2” (51mm) or 3” (76mm) Included
Spindle Mounting Hole Size
5/16” - 24 Female
hp (W)
.3 (224)
Free Speed RPM
0 - 3,500 +/-10%
RPM Max
3,850 RPM
Air Consumption, Free Speed
3 cfm x 7.122 = 21.37 scfm
Max Air Flow @ 90 PSIG
3CFM(L/Min.): 21.37 scfm (84.9 L/min)
Recommended air pressure
6.2 bar (90 psi)
Hose I.D. Size Inches (mm)
3/8" (10mm)
Rotor Material
SNCM21
Weight
2.2 lbs. / 1kg
Dimensions
263mm (L) x 65mm (W) x 40mm (T)
*Noise Level dBA Pressure
78.1 dB(A) LpA / 89.1 dB(A) LwA
**Vibration Level m/s2
<2.5 m/s2
* Declared noise levels; measurements carried out in accordance with standard EN ISO15744:2008.
** Declared vibration levels in accordance with EN 28927-3, the uncertainty, K=0.6 m/s2.
IMPORTANT NOTE: The noise and vibration values stated in the table are from laboratory testing in
conformity with stated codes and standards and are not sufficient risk evaluation for all exposure
scenarios. The actual exposure values and amount of risk or harm experienced to an individual is unique
to each situation and depends upon the surrounding environment, the way in which the individual works,
the particular material being worked, work station design, as well as upon the exposure time and the
physical condition of the user. Griot’s Garage cannot be held responsible for the consequences of using
declared values instead of actual exposure values for any individual risk assessment.
EC DECLARATION OF CONFORMITY
We, Griot’s Garage Inc. 3333 South 38th St. Tacoma, WA 98409 declare under our sole responsibility
that the product to which this declaration relates, is in conformity with the requirements of Machinery
Directive of 2006 on the approximation of the laws of the Member States relating to machinery
(2006/42/EC).
Type: SG-0435F RIGHT ANGLE BUFFER
And comply with the provisions set out in the following European Standard:
1. ISO 12100: 2010 (Risk Assessment & Risk Reduction)
2. ISO 11148-8: 2010 (Safety Requirements)
3. EN 28927-3: 2009 (Vibration level)
4. ISO15744:2008 (Noise level)
For EC Declaration of Conformity, please contact Griot’s Garage Customer Service at 1-800-345-5789.
